Valves
Ball Valve
- Standard Duty / Heavy Duty / Compact Type Ball Valve
- Heavy Duty Control Ball Valve
- Tank Bottom Valve
- Bottom Drain Ball Valves
FEATURES
- Maximum reliability: Weak spot ball to stem is avoided by one-piece ball/stem unit.
- Universally applicable: many options are available in combination with a thick-walled PFA lining.
- Reliable even in extreme conditions: ENVIPACK stuffing box sealing
- Maintenance-free & adjustable stem sealing
- Cost-effective alternative to bottom drain valves
- Best control characteristics of a ball valve due to specially designed interior contour
SPECIFICATIONS
- Design: ASME/ISO/DIN
- Sizes: ½” to 8” (DN15 to DN200)
- Pressure Rating: ASME150 / 16 bar
- Temperature Range – -60 °C to +180 °C (-80 °F to +360 °F)
- Lining: PFA / Conductive PFA (3.5 mm min)
- Housing Material: EN-JS 1049
- Face-to-Face: ANSI B16.10, DIN EN 558-1, ISO 5752 series 1
- Flanges to ISO 7005-2, type B or flanges drilled to ASME B16.5 class 150, raised face
- V-Port ball design available for control applications
APPLICATIONS
- Process & Dry Air
- H2SO4
- HCI
- Caustic Soda
- Brine
- Thinyl Chloride + Tetra-n-butylammonium chloride
Butterfly Valve
- Wafer Style Butterfly Valve With Multi-Position Lever
- Remote Actuated
- Manually operated Gear with handwheel
FEATURES
- High reliability due to thick-walled PFA lining
- Heavy-Duty bellows enable safety at high pressures and temperatures
- Special design for Chlorine application to offer reliability and longer service life
- Double action, maintenance-free and self-adjusting top and bottom stem sealing – wide variety of discs / body combinations possible
SPECIFICATIONS
- Design: ISO/DIN
- Pressure Range: 0.1 mbar to 16 bar
- Temperature Range = -40 °C to +200 °C (-40 °F to 400 °F)
- Disc Lining = PFA
- Body Liner (Seat): PTFE / PFA (3.5 to 5 mm)
- Body Lining Option: Modified PTFE
- Housing Material: EN-JS 1049 / ASTM A395
- Face-to-Face: DIN EN 558-1 and ISO 5752 series 1, API 609 Table 1, MSS SP-67 Table 3
- Flanges to ISO 7005-2, type B or flanges drilled to ASME B16.5 class 150, raised face
- Certifications = EU Pressure Equipment Directive 2014/68/EU, German Clean Air Act (TA-Luft), SIL
APPLICATIONS
- Hydrogen Gas
- Methyl Chloride
- Brine
- Hypo
- Hydrogen fluroide Acid Vapours
- Filtered Brine & Caustic Solution
- Chlorine Gas
- Lean Brine
Saturated Brine
Crude Brine
- Methane Sulphonyl Chloride
Check Valve
- Ball Check Valve
- Stem Check Valve
- High-Capacity Check Valve
- Sight Glass Check Valve
FEATURES
- Maximum reliability: body PFA lining 4 – 6 mm
- ASME/ISO design, with solid ball/ plug, can be installed vertically and horizontally
- Can also be used for vapours, gases and liquids
- Closes even with a very small or no pressure difference
- Wide variety of check valves available
- Seat and seat seal easily replaceable
- Vacuum-resistant
- Maximal protection by Borosilicate glass panes
SPECIFICATIONS
- Design – ASME/ISO / ANSI/ISA-75.08.01 ANSI/ISA-75.08.01
- Nominal Pressure – Class 150/16 bar
- Lining – PFA
- Housing Material – EN-JS 1049 / ASTM A395
- Face-to-Face – Peabody-Dore/DIN EN 558-1 and ISO 5752 series 1 / ANSI/ISA -75.08.01
- Flanges to ISO 7005-2, type B or flanges drilled to ASME B16.5 class 150, raised face
- Temperature Range – -60 °C to +180 °C (-75 °F to +360 °F)
- Certifications – EU Pressure Equipment Directive 2014/68/EU, German Clean Air Act (TA-Luft)
APPLICATIONS
- Nitrogen
- Green Liquor
Ammonium Sulphate
- Solvents
- Lean Black Liquor
- Air
- Ammonia
- Alcohol
- White Liquor
Control Valves / Rising Stem Valves
- Bellows-Sealed Valves
- Bellows-Sealed Control Valve
FEATURES
- High reliability due to thick-walled PFA lining: universal resistance and maximum permeation resistance
- Safety also at high pressures and temperatures due to heavy-duty bellows
- Chlor application: special design for particularly long service life
- Maintenance-friendly: seat and plug individually replaceable.
SPECIFICATIONS
- Design – DIN/ISO ANSI/ISA-75.08.01
- Nominal Pressure – 16 bar, Class 150
- Lining – PFA
- Housing Material – EN-JS 1049 / ASTM A395
- Face-to-Face – DIN EN 558-1 and ISO 5752 series 1, ANSI 75.08.01 Cl 150+300
- Flanges to ISO 7005-2, type B or flanges drilled to ASME B16.5 class 150, raised face
- Temperature Range – -60 °C to +180 °C (-75 °F to +360 °F)
- Certifications – EU Pressure Equipment Directive 2014/68/EU, German Clean Air Act (TA-Luft)
APPLICATIONS
- Soda Ash
- Water + Acetic Acid
- Nitrogen Vent Gas
- Bromine
- Tert-Butyl Alcohol Vent
- HCL
- Residue Vent Gas
- Oxygen Vent Gas
- 98% H2SO4
- Alcohol
Safety Valves
- Overflow Valve
- Low-Pressure Safety Valve
#spring-loaded, direct-acting, with bellows-seal, conical sealing surface,
lined PFA Direct acting, angle design, inline design, weight-loaded, bellows made of PTFE, seat and plug made of modified PTFE, plug and seat replaceable, certified for liquids, lined PFA antistatic certified for vapours, gases and fluids, gauge pressure +20 to +120 mbar, vacuum -20 to -120 mbar, set pressure 1.0-13 bar.
FEATURES
- Reliable safeguarding against over pressure (overflow valve)
- Reliable maintaining of plant pressures (pressure relief valve)
- Maximum reliability due to thick-walled PFA lining
- Optimum environmental protection: hermetically tight thanks to bellows design
- Safe venting or aeration of reactors and vessels
- Easily adaptable through removal or adding of the weight rings.
- For very small set pressures of -120 to +120 mbar
- Universally applicable: type-tested for vapours, gases and liquids
- Safety even with frequent opening and closing
- Also, for small differences between operating and opening pressure
SPECIFICATIONS
- Design – ANSI-ISA-75.08.01 / DIN-ISO
- Nominal Pressure – Class 150 / 16 bar
- Lining – PFA
- Housing Material – EN-JS 1049 / ASTM A395
- Face-to-Face – ANSI/ISA-75.08.01 / DIN EN 558-1 and ISO 5752 series 1
- Flanges to ASME B16.5, raised face or ISO 7005-2, type B/ ISO 7005-2, type B or flanges drilled to ASME B16.5 class 150, raised face.
- Temperature Range – -60 °C to +180 °C (-75 °F to +360 °F)
- Certifications – EU Pressure Equipment Directive 2014/68/EU, German Clean Air Act (TA-Luft)
APPLICATIONS
- H2 Moist Gas Application
- Chlorine
Sight Glasses
FEATURES
- Easy and fast maintenance
- Vacuum-resistant
- Clear view from all sides
- Can also be used as a level indicator
- Dead space free design available
- Easy to use due to the large field of vision
- Reliable display even with small amounts thanks to the drip lip
- Maximum reliability: thick-walled PFA lining and borosilicate glass panes
- Cover flanges individually exchangeable
SPECIFICATIONS
- Design – ISO/DIN
- Nominal Pressure – 16 bar
- Lining – PFA
- Housing Material – EN-JS 1049
- Face-to-Face – DIN EN 558-1 and ISO 5752 series 1
- Flanges to ISO 7005-2, type B or flanges drilled to ASME B16.5 class 150, raised face
- Temperature Range – -60 °C to +180 °C (-75 °F to +360 °F)
- Certifications – EU Pressure Equipment Directive 2014/68/EU, German Clean Air Act (TA-Luft)
APPLICATIONS
- Any Special Chemicals
Sliding Stem Valves
FEATURES
BOTTOM DRAIN STEM VALVE
- High reliability: aggregations of solids are enetrated by the plug opening upwards
- Easy to maintain thanks to replaceable shut-off plug and seat
- Improved environmental protection: hermetically tight thanks to bellows design
- Thick-walled, vacuum-proof PTFE lining
DIAPHRAGM VALVES
- High reliability due to thick-walled PFA lining and diaphragms made of modified PTFE
- Reliable as “floating” connection diaphragm to stem
- Long service life: diaphragm made of modified PTFE
- Clean-room applications possible
SAMPLING VALVE
- Sample always representative: sampling from the main flow
- No falsification of the sample through residual media: design cavity-free
- High safety through PFA lining and bellows seal
- Representative sampling
SPECIFICATIONS
- Design – ISO/DIN
- Nominal Pressure – 10 bar/ 16 bar
- Lining – PTFE/PFA
- Housing Material – EN-JS 1049 / 1.4435
- Face-to-Face – Similar to DIN 28140-1 / DIN EN 558-1 and ISO 5752 series 1
- Flanges to ISO 7005-2, type B or flanges drilled to ASME B16.5 class 150, raised face
- Temperature Range – -60 °C to + 200 °C (-75 °F to +400 °F)
- Certifications – EU Pressure Equipment Directive 2014/68/EU, German Clean Air Act (TA-Luft), DIN EN ISO 15848-1, SIL
APPLICATIONS
- Any Special Chemicals
Valves
Ball Valves
The ball valve Is reliable on-off isolation and modulating control for all industrial applications. They are easy to repair, operate manually or by actuators. The variety of seats and body materials allows it to respond to multiple applications in the industry.
| Application: Water, Gas, Oil & Chemicals | Size: 1/2” - 56” |
| Class: 150 - 2500 | Ends: Flanged or Welded Connection |
| Flange Connection: ANSI B16.5, BS 4504, DIN 2501, ISO 705 | MOC: Carbon steel, Stainless steel, PVC, PFA/PTFE lined, Alloy steel, Special (Monel, Inconel, Hastelloy etc.) |
Gate Valves
Gate valves can be used in many applications. They allow the fluid to flow in a fully open position and be restricted in the fully closed position, with minimal load losses. The design covers a wide range of requirements to meet any customer need from general to severe service conditions.
| Application: Water, Gas, Oil & Chemicals | Size: 1/2” - 56” |
| Class: 150 - 2500 | Ends: Flanged or Welded Connection |
| Flange Connection: ANSI B16.5, BS 4504, DIN 2501, ISO 705 | MOC: Carbon steel, Stainless steel, PVC, PFA/PTFE lined, Alloy steel, Special (Monel, Inconel, Hastelloy etc.) |
Globe Valves
Globe valve is a versatile and almost a maintenance free industrial valve which can be used in many applications. Globe valves are used in closing and regulation operations in different pipelines.
| Application: Water, Gas, Oil & Chemicals | Size: 1/2” - 24” |
| Class: 150 - 2500 | Ends: Flanged or Welded Connection |
| Flange Connection: ANSI B16.5, BS 4504, DIN 2501, ISO 705 | MOC: Carbon steel, Stainless steel, PFA/PTFE lined, Alloy steel, Special (Monel, Inconel, Hastelloy etc.) |
Check Valves
There is various type of check valve, feature a simple yet effective design that prevents the backflow of line media including gases, liquids, & more.
| Application: Water, Gas, Oil & Chemicals | Size: 1/2” - 60” |
| Class: 150 - 2500 | Ends: Flanged or Welded Connection |
| Flange Connection: ANSI B16.5, BS 4504, DIN 2501, ISO 705 | MOC: Carbon steel, Stainless steel, PVC, PFA/PTFE lined, Alloy steel, Special (Monel, Inconel, Hastelloy etc.) |
Butterfly Valves
A Butterfly valve is a quarter-turn rotational motion valve, that is used to stop, regulate, and start flow. Butterfly valves are easy and fast to open.
| Application: Water, Gas, Oil & Chemicals | Size: 2” - 60” |
| Class: 150 - 2500 | Ends: Flanged or Welded Connection |
| Flange Connection: ANSI B16.5, BS 4504, DIN 2501, ISO 705 | MOC: Carbon steel, Stainless steel, PVC, PFA/PTFE lined, Alloy steel, Special (Monel, Inconel, Hastelloy etc.) |
Safety Valves
A safety valve is designed to open and relieve excess pressure from vessels or equipment and to reclose and prevent the further release of fluid after normal conditions have been restored.
| Application: Water, Gas, Oil & Chemicals | Size: 1” - 8” |
| Class: 150 - 2500 | Ends: Flanged or Welded Connection |
| Flange Connection: ANSI B16.5, BS 4504, DIN 2501, ISO 705 | MOC: Carbon steel, Stainless steel, PVC, PFA/PTFE lined, Alloy steel, Special (Monel, Inconel, Hastelloy etc.) |
Expansion Joints
Expansion joints are flexible components in pipes and joints. They are resistant to high temperature loads, chemically resistant to the corresponding flow media and stable when subject to over or negative pressure.
| Application: Water, Gas, Oil & Chemicals | Size: 8” - 80” |
| Class: 150 - 2500 | Ends: Flanged or Welded Connection |
| Flange Connection: ANSI B16.5, BS 4504, DIN 2501, ISO 705 | MOC: Carbon steel, Stainless steel, Alloy steel, Duplex Steel. |
Strainer
Scale and dirt in piping systems can cause endless trouble and serious damage to pipeline equipment. Installation of strainers will help eliminate the problems caused by foreign matter within piping systems.
| Application: Water, Gas, Oil & Chemicals | Size: 2” - 48” |
| Class: 150 - 2500 | Ends: Flanged or Welded Connection |
| Flange Connection: ANSI B16.5, BS 4504, DIN 2501, ISO 705 | MOC: Carbon steel, Stainless steel, Alloy steel, Duplex Steel. |